UK SI 898-Food contact-Global United Technology Services Co.Ltd.-Global United Technology Services Co.Ltd.

Product category/

热门新闻/ Hot news

联系我们/ Contact us

Global United Technology Services Co. Ltd.

电话：134-1090-7279

邮箱：robinson.lo@gtstest.com

地址：1F, Block B, Jinyuan Business Building, No.302, Xixiang Avenue, Bao 'an District, Shenzhen

UK SI 898

发布日期：2021-11-05 阅读量：497 发布者：超级管理员

UK Food Contact Material Safety Regulations|UK SI 898:2005

Common materials UK SI 898:2005 test content:

a) Plastic material

Overall migration in deionized water

Overall migration in 3% acetic acid

Overall migration in 10% ethanol

Overall migration in rectified olive oil

Full test of overall migration test

b) Ceramic and Glass

Contact with food part-Leachable lead and cadmium

c) Silicone Rubber-AP (2004)5

Overall migration in deionized water

Overall migration in 3% acetic acid

Overall migration in 10% ethanol

Overall migration in isooctane as substitute of rectified olive oil

Overall migration in 95% ethanol as substitute of rectified olive oil

Full test of overall migration test

d) Requirements for Melamine resin products

Overall migration in deionized water

Overall migration in 3% acetic acid

Overall migration in 10% ethanol

Overall migration in isooctane as substitute of rectified olive oil

Overall migration in 95% ethanol as substitute of rectified olive oil

Full test of overall migration test

Extractable formaldehyde test

e) Organic coating-AP(2004)1

Overall migration in deionized water

Overall migration in 3% acetic acid

Overall migration in 10% ethanol

Overall migration in isooctane as substitute of rectified olive oil

Overall migration in 95% ethanol as substitute of rectified olive oil

Full test of overall migration test

f) Rubber-AP (2004) 4 & 93/11/EEC

Overall migration in deionized water

Overall migration in 3% acetic acid

Overall migration in 10% ethanol

Overall migration in isooctane as substitute of rectified olive oil

Overall migration in 95% ethanol as substitute of rectified olive oil

Full test of overall migration test

Nitrosamine content (Need subcontract to HK)

Migration of aromatic amine

g) Paper-AP (2002)1

Pentachlorophenol (PCP)

Preserving effect

Extractable Heavy metals (Pb, Cd, Hg, CrVI)* Released amount of heavy metals (lead, cadmium, mercury, hexavalent chromium)*

Fluorescent matter (four simulant states)

* -not acceptable for the product in contact with dry food

*-Not suitable for contact between paper and dry food

h) Wood

Pentachlorophenol (PCP)

Extractable Formaldehyde

i) Metal, Metal alloy and electroplated

Metals, alloys and electroplating

Global Zhongyi can provide you with various types of food contact material testing tests. If you encounter any problems, you can call our engineers for consultation.

Global Zhongyi K can provide you with various food contact material testing solutions. The specific test items and test methods of UK SI 898 for food contact material testing are as follows.

Universal one can provide you with all kinds of Detection of food contact materials The test of, In case of any problem, please call our engineer for consultation.

Universal one K can provide you with a variety of food contact material testing programs, UK Detection of food contact materials The specific test items and methods of UK Si 898 are as follows.

General requirements for plastics; (PP, PE, POM, PS, as, PMMA, EVA, pet, PPS, PU materials are only general requirements)	Order of 2/01/2003	A. Total migration - 10% ethanol Overall migration in 10% ethanol	10mg/dm2 (infant products 60mg / kg)	EN1186-1； EN1186-3	1. According to customer requirements, a can be changed to water, D2 can be changed to 95% ethanol or isooctane; 2. Choose one from a, C and D1, and the default is a; 3. Contact all types of food to do a + B + D2	＜3mg/dm2
		B. Total migration - 3% acetic acid Overall migration in 3% acetic acid		EN1186-1； EN1186-3		＜3mg/dm2
		C. Total migration - 20% ethanol Overall migration in 20% ethanol		EN1186-1； EN1186-3		＜3mg/dm2
		D1. Total migration - 50% ethanol Overall migration in 50% ethanol		EN1186-1； EN1186-3		＜3mg/dm2
		D2. Total migration - vegetable oil Overall migration in vegetable oil		EN1186-1； EN1186-2		＜3mg/dm2
		Specific migration of metals	See note 7 for limits	BS EN13130 -1:2004	See Note 1	ND，MDL
		Specific migration of primary aromatic amines (PAA)	0.01 mg/kg	BS EN13130 -1:2004	See Note 1	ND, MDL=0.01
		Default item: total migration (10% ethanol, 3% acetic acid, vegetable oil) + heavy metal migration
PC polycarbonate	Order of 2/01/2003	General requirements for plastics
PC polycarbonate	Order of 2/01/2003	Special migration - bisphenol a migration Specific migration of BPA	0.6mg/kg	BS EN13130 -13:2004	See Note 1	ND, MDL=0.1
ABS acrylonitrile styrene butadiene copolymer	Order of 2/01/2003	General requirements for plastics
		Butadiene migration Specific migration of butadiene	No detection ＜0.01mg/kg	BS EN13130 -15:2004	See Note 1	ND，MDL= 0.1mg/kg
		Migration of acrylonitrile Specific migration of acrylonitrile	No detection ＜0.01mg/kg	BS EN13130 -3:2004	See Note 1	ND，MDL= 0.1mg/kg
Polyamide (nylon PA)	Order of 2/01/2003	General requirements for plastics
	（EU） No.284/2011	Primary aromatic amine (PAA) Specific migration of primary aromatic amines (must do)	0.01 mg/kg	BS EN13130 -1:2004	See Note 1	ND, MDL=0.01
	（EU） No.284/2011	Formaldehyde migration Specific migration of formaldehyde	15mg/kg	BS EN13130 -23：2004	See Note 1; Plastic kitchen utensils recommended	ND, MDL=1
		Special migration caprolactam migration (optional) Specific migration of Caprolactam	15 mg/kg	BS EN13130 -16：2004	See Note 1	ND, MDL=5
Melamine plastics	（EU） No.10/2011	General requirements for plastics
	（EU） No.284/2011	Primary aromatic amine (PAA) (optional)	0.01 mg/kg	BS EN13130 -1:2004	See Note 1	ND, MDL=0.01
	（EU） No.1282/2011	Migration of melamine monomer Special Migration of Melamine monomer	2.5mg/kg	BS EN13130 -1:2004	See Note 1	ND, MDL=1
	（EU） No.1282/2011	Formaldehyde migration	15mg/kg	BS EN13130 -23：2004	See Note 1; Plastic kitchen utensils recommended	ND, MDL=1
Polyvinyl chloride (PVC)	78/142/EEC Order of 2/01/2003	General requirements for plastics
		Content of vinyl chloride monomer (VCM)	1 mg/kg		80/766/EEC Reference book p86	ND, MDL=0.5
		Specific migration of vinyl chloride monomer	No detection ＜0.01mg/kg	BS EN13130 -1:2004	81/432/EEC Reference book P91	ND, MDL=0.01
coating	AP(2004)1	Same as general requirements for plastics
silica gel	Order of 09/11/1994	A. Total migration - 10% ethanol Overall migration in 10% ethanol	10mg/dm2 (60mg/kg) According to product shape	EN1186-1； EN1186-3	1. According to customer requirements, a can be changed to water, D2 can be changed to 95% ethanol or isooctane; 2. Choose one from a, C and D1, and the default is a; 3. Contact all types of food to do a + B + D2	＜3mg/dm2
		B. Total migration - 3% acetic acid Overall migration in 3% acetic acid		EN1186-1； EN1186-3		＜3mg/dm2
		C. Total migration - 20% ethanol Overall migration in 20% ethanol		EN1186-1； EN1186-3		＜3mg/dm2
		D1. Total migration - 50% ethanol Overall migration in 50% ethanol		EN1186-1； EN1186-3		＜3mg/dm2
		D2. Total migration - vegetable oil Overall migration in vegetable oil		EN1186-1； EN1186-2		＜3mg/dm2
		Volatile organic compounds (VOM) Volatile organic matter	zero point zero zero five	order of 25/11/1992, annex III, section2	200°C,4H	＜0.1%
		Peroxides	Absent	according to the French pharmacopoeia, Xth edition.		Absent
		Migration of organotin (as tin) (optional)	0.1mg/kg		See Note 1
rubber	Order of 09/11/1994	A. Total migration - 10% ethanol Overall migration in 10% ethanol	10mg/dm2 (60mg/kg) According to product shape	EN1186-1； EN1186-3	1. According to customer requirements, a can be changed to water, D2 can be changed to 95% ethanol or isooctane; 2. Choose one from a, C and D1, and the default is a; 3. Contact all types of food to do a + B + D2	＜3mg/dm2
		B. Total migration - 3% acetic acid Overall migration in 3% acetic acid		EN1186-1； EN1186-3		＜3mg/dm2
		C. Total migration - 20% ethanol Overall migration in 20% ethanol		EN1186-1； EN1186-3		＜3mg/dm2
		D1. Total migration - 50% ethanol Overall migration in 50% ethanol		EN1186-1； EN1186-3		＜3mg/dm2
		D2. Total migration - vegetable oil Overall migration in vegetable oil		EN1186-1； EN1186-2		＜3mg/dm2
		Volatile organic compounds (VOM) Volatile organic matter	zero point zero zero five	order of 25/11/1992, annex III, section2	105°C,4H	＜0.1%
		Peroxides value (optional)	Absent	according to the French pharmacopoeia, Xth edition.		Absent
		Migration of aromatic amines (optional)	1mg/kg	BS EN13130 -1:2004	See Note 1	ND，MDL=0.1
		Migration of formaldehyde (optional)	3mg/kg	BS EN13130 -23：2004	See Note 1	ND，MDL=1
		Migration of N-nitrosamines	Nipple 10ug / kg product Other 1ug / DM2	EN 12868:1999 Food simulants		ND，MDL
		Migration of nitroso compounds substances	Nipple 100ug / kg product Other 10ug / DM2	EN 12868:1999 Food simulants		ND，MDL
General requirements for metals	Cm / res (2013) 9 guidelines for metals and alloys in contact with food	Dissolution of 23 heavy metals - artificial tap water			Substances other than acids (including dry)	ND,MDL
		Dissolution of 23 heavy metals - 0.5% citric acid （PH＜4.5）Extractable Heavy metals in 0.5% citric acid			Contact with acid substances (pH ≤ 4.5)	ND,MDL
	Dissolution of 7 heavy metals	Dissolution of seven heavy metals (old standard) Ni, CD, Cr, Pb, Co, Cu, sb			See Note 1;	ND,MDL
Stainless steel-1	DM-4B-COM-001-V01	General requirements for metals
		Composition analysis (carbon, silicon, manganese, phosphorus, sulfur, nickel)	Different types of requirements are inconsistent (DM / 4B / COM / 001 Annex 4)	EPA3050B		ND,MDL=2
		Chromium and chromium content	Cr≥13%	EPA3050B
		Tantalum (TA), Niobium (NB), Zirconium (Zr)	< 1% respectively	EPA3050B
		Molybdenum (MO), Titanium (TI), Aluminum (AL), Copper copper (Cu)	< 4% respectively	EPA3050B
Steel materials (packaging) - 3A	DM-4B-COM-001-V01	Metal composition (22 elements)	See note 3	EPA3050B
Steel materials (packaging) - 3A	DM-4B-COM-001-V01	Lead, cadmium, arsenic and cobalt (included in the above 22 elements)	Pb < 0,010 % Cd < 0,010 % As < 0,030 % Co < 0,050%	EPA3050B
Iron and steel materials - with metal coating (packaging) - 3B	DM-4B-COM-001-V01	The base metal composition meets the requirements of corresponding steel materials (packaging)		EPA3050B
		The tin coating needs to meet the requirements of bsen610 for 99.85 tin and needs to be tested (al, as, Bi, CD, Cu, Fe, Pb, Sb, Zn)	See note 4	EPA3050B
		Lead, cadmium and arsenic are bad elements in coating	Pb < 0,010 % Cd < 0,010 % As < 0,030 % Co < 0,050%	EPA3050B
Steel materials - with organic coating (packaging) - 3C	DM-4B-COM-001-V01	Coating see plastic requirements (dry food does not need to be moved)			When the pH value is less than 4.5, 10% ethanol simulant is used
		The base material needs to meet the requirements of the corresponding metal (optional)
		Migration of hexavalent chromium in non-contact organic coatings	5ug/dm2
Steel materials (non packaging) - 4	DM-4B-COM-001-V01	Metal composition (21 elements)	See note 5		Such as tableware, kitchenware
Steel materials (non packaging) - 4	DM-4B-COM-001-V01	Bad elements lead, cadmium, arsenic (included in the above 21 elements)	Pb<0.05%； Cd<0.01%； AS<0.03%
Iron, steel and stainless steel - with metallic coating (non packaging) - 5A	DM-4B-COM-001-V01	The base metal composition meets the corresponding requirements of stainless steel and steel materials (non packaging)
		Lead, cadmium, arsenic and cobalt are bad elements in coating	Pb < 0,010 % Cd < 0,010 % As < 0,030 % Co < 0,050%
		Migration of heavy metals nickel, chromium and zinc	Ni:0.5mg/kg； Cr：5mg/kg； Zn: 10 mg / kg simulant	Dry food does not need to be moved	Water based: Deionized water
					PH ≤ 4.5: 0.5% citric acid;
					Alcohol: 10% or higher concentration of ethanol
					Lipids: Oil 2H
Steel and stainless steel - with organic coating (non packaging) - 5B	Order of 15/11/1945	Coating see plastic requirements (dry food does not need to be moved)			When the pH value is less than 4.5, 10% ethanol simulant is used
		Migration of hexavalent chromium in non-contact organic coatings	5ug/dm2
		The base material needs to meet the requirements of the corresponding metal (optional)
Aluminium and aluminium alloy-2	DM-4B-COM-001-V01	Metal composition and element content of aluminum (13 elements including Fe, Si, Ti, Cr, Zn, Cu, Mn, Mg, Ni, Sn, Pb, Ti, be)	See Note 6
		Content of metal elements in aluminum alloy (Si, Sb, Sn, Mg, Cr, Mn, Ti, Ni, Zr, Fe, Zn, Cu, Sr, as, Ta, be, Ti, Pb)	See Note 6
		Coating see plastic requirements (dry food doesn't need to be moved) yes		When pH value is less than 4.5, 10% ethanol simulant (10% ethanol * packaged food (beverage can, light can =) Acetic acid 3% * for other applications such as tableware and household goods (pots, pans, dishes...) and equipment All food (including dry food with acid removed)
Cast iron (as iron pot)		lead	≤0.05%
Cast iron with metal coating-5a	DM-4B-COM-001-V01	Lead as base material	≤0.05%
		Lead, cadmium and arsenic are bad elements in coating	Pb≤0.050%； Cd≤0.010%； AS≤0.030%
		Heavy metals nickel, chromium, migration (when the coating is nickel and chromium respectively)	Ni:0.5mg/kg； Cr: 5mg / kg food		Water based: Deionized water
					PH ≤ 4.5: 0.5% citric acid;
					Alcohol: 10% or higher concentration of ethanol
					Lipids: Oil 2H
Cast iron with organic coating-5b		Coating see plastic requirements
		The base material needs to meet the requirements of the corresponding metal (optional)
		Migration of hexavalent chromium in non-contact organic coatings	5ug/dm2
Tin and tin alloy-7	DM-4B-COM-001-V01	Tin content	≥97%
		Bad elements lead, cadmium and arsenic	Pb≤0.050%； Cd≤0.010%； AS≤0.030%
		Antimony antimony (sb); Copper copper (Cu)	Sb≤ 2.5%； Cu≤ 1.5%
Zinc and zinc alloy-8	DM-4B-COM-001-V01	Zinc content	≥99.85%
		Bad elements lead, cadmium and arsenic	Pb≤0.05%； Cd≤0.01%； AS≤0.03%
		Specific migration of Zn	10 mg / kg food
Other metal materials - 9		Bad elements lead, cadmium and arsenic	Pb≤0.050%； Cd≤0.010%； AS≤0.030%
Other metal materials - 9		Migration of heavy metals (Ni, Cr, Zn, Pb, CD) Specific migration of metals	Ni:0.5; Cr:5; Zn:10; Pb:4.0; Cd:0.3mg/kg
Glass, crystal, ceramics, enamel products	DM-4B-COM-002-V01	lead	See Note 2		4% acetic acid at 22 ℃ for 24h	ND,MDL
		cadmium	See Note 2			ND,MDL
		Hexavalent chromium (not for ceramics)	Flatware:0.005mg/dm2			ND,MDL
			Hollowware(>3L):0.03mg/l
			Hollowware(<3L):0.03mg/l
			Lip and rim:0.015mg/unit
		Aluminum (not suitable for direct oral contact)	1mg/kg		4% acetic acid at 22 ℃ for 24h, the reused products need to be moved three times, and the third time is the final result	ND,MDL
		Cobalt (not suitable for direct oral contact)	0.02mg/kg			ND,MDL
		Arsenic (not suitable for direct oral contact)	No detection (detection limit is 0.002mg/kg)			ND,MDL
woodwork	AP(2004)2	Pentachlorophenol	The residue was 0.15mg/kg	EN15320
woodwork	AP(2004)2	Specific migration of formaldehyde	Limit: 15mg / kg food	EN13130-1	See Note 1	ND, MDL=1
Paper and cardboard	CSHPF 13/10/98 CSHPF 7/11/95	Organoleptic inertia	Absence	EN 1230-2		absent
		Pentachlorophenol (PCP) content	≤ 0.1 mg/kg of paper	EN/ISO 15320		ND，MDL=0.05
		Migration of formaldehyde	≤ 1 mg/dm2	Methods: en645 cold water extraction or en647 hot water extraction, bsen1541-2001 determination		ND，MDL=0.5
		Extractable heavy metals (Pb, CD, Hg, Cr^VI )	Pb≤3 mg/kg paper Cd≤0.5 mg/kg Hg≤0.3 mg/kg CrVI≤0.25 mg/kg	En645 cold water extraction or en647 hot water extraction, env 12497 (Hg) ENV12498 (Pb, Cr, Cd)		ND，MDL
		Fast to blending colorants	Grade 5	EN 646 or EN648		Concrete series
		Hot extraction	10 mg/dm2 or 10 mg/g of paper	EN 920		＜3mg/dm2
		Polychlorobiphenyl (PCB) content	≤ 2 mg/kg of paper	EN/ISO 15318		ND，MDL=1
		Glyoxal extractable (optional)	≤ 1.5 mg/dm2			ND，MDL=0.5
		Transfer of antimicrobial substances (optional)	No Transfer of antimicrobial agents		BS EN 1104-2005	There was no migration of antimicrobial components
	1. Dry food needs to be tested: sensory, PCP, PCB, formaldehyde migration, glyoxal migration, antibacterial component migration; 2. Liquid or lipid food: except for hot extract, other items should be done; 3. Thermal filtration products: sensory, PCP, PCB, extractable heavy metals, thermal extract, migration of antibacterial components; 4. Cooking products: sensory, PCP, PCB, extractable heavy metals, migration of antibacterial components.

< 上一篇

返回列表

下一篇 >