地址：1F, Block B, Jinyuan Business Building, No.302, Xixiang Avenue, Bao 'an District, Shenzhen
Enacom certification in Argentina
发布日期：2021-11-06阅读量：849发布者：超级管理员
Introduction to certification
Enacom certification in Argentina is a compulsory certification for wireless and telecommunication products. All equipment connected to public telecommunication network and using radio frequency band shall apply for enacom certification. For the export of wireless communication products to Argentina, it is required to apply for enacom certification. The original control unit of Argentine wireless certification was CNC, later changed to aftic, and then changed to enacom after 2015.
Basic information of enacom certification Compulsory certification: Yes Test content: RF Factory inspection required: no Local testing: required Local agent: Yes Certificate validity: 3 years
Certification Type
There are two forms of authentication
Homologaci ó n (Argentina standard certification) or codificaci ó n (recognized certification in the absence of a standard).
Applicable product range
The vast majority of telecommunication line terminal equipment and RF equipment need to be tested.
·All terminal equipment connected to the public telephone network; · Low power spread spectrum communication products operating in the frequency band of 2.4 – 2.4835 GHz; · Most radio equipment.
Application process
1. Sample sending Argentina test 2. No factory inspection is required 3. Certificate holder: Argentine importer 4. One certificate for each model 5. One trademark, one certificate 6. Certificate validity: 3 years
7. Certification period: 12-14 weeks (from the arrival of samples to Argentina, laboratory test and complete data)
Note: Argentine importers or distributors must complete enacom registration to obtain the certificate
Application materials
1. Spanish manual 2. Product name plate 3. Inside and outside photos 4. Test software 5. Technical specifications 6. Technical data 7. Antenna specifications 8. Customer basic information table 9. Argentine importer information (if any) 10. 3 samples
other
1. The output power shall meet all the following test items: Conduction power: 500MW (PK) Radiation power: EIRP, 43dbm (PK) and 40dbm (AV)
Power density: EIRP, 13dbm / MHz (AV)
2. The antenna gain should be adjusted to meet the above output power requirements.
3. Limited to indoor use. FCC / CE test reports issued by relevant laboratories will be available for certification applications.
